Sidee loo Doortaa Mitirka Socodka Elektromagnetic-ka ee Saxda ah?

Marka aad dooranaysomitirka socodka elektromagnetic-ka(EMF), dhowr arrimood oo muhiim ah waa in la tixgeliyaa si loo hubiyo cabbiraadaha saxda ah iyo isku halaynta muddada dheer:

1. Shuruudaha Dhexdhexaadka ah
   Dareeraha waa inuu noqdaa mid gudbiya (badanaa ≥5 μS/cm), sida:

• Biyo (biyaha tuubada, wasakhda, biyaha badda)
• Xalalka aashitada iyo alkaline (warshadaha kiimikada)
• Budada, saxarka, iyo macdanta (isku darka adag iyo dareeraha ah ee gudbiya)

Kuma habboona dareerayaasha aan gudbin karin, sida:

1. • Biyo la safeeyey, biyo la safeeyey
   • Saliidaha (batrool, gaas, naafto)
   • Dareeraha qaarkood ee dabiiciga ah (tusaale ahaan, khamriga, benzene)
2. Dhexroorka Tuubada iyo Heerka Socodka
   Dooro mitir socod oo la jaanqaadaya heerka socodka ee ku habboon. Guud ahaan, xawaaraha socodka oo ah 1-5 m/s ayaa lagu talinayaa. Xawaaraha socodka oo aad u hooseeya ayaa saameyn kara saxnaanta cabbirka, halka heerka sare uu kordhin karo luminta cadaadiska.
   Dhexroorka tuubadu waa inuu la mid noqdaa cabbirka mitirka socodka. Haddii xawaaraha socodka uu aad u hooseeyo, dooro dhexroor yar si aad u hagaajiso xasilloonida cabbirka.
3. Xulashada Qalabka Elektrode-ka iyo Dahaarka
   Agabka loogu talagalay elektroodhada iyo dahaarka waa in lagu xushaa iyadoo lagu saleynayo daxalka, heerkulka, iyo xaaladaha xirashada ee dareeraha:

   Alaab	Dhexdhexaad ku habboon
   Qalabka Elektroodhka
   Bir aan miridh lahayn oo 316L ah	Bulaacad, dareere dhexdhexaad ah
   Tantalum (Ta)	Asiidhyo xooggan (tusaale ahaan, nitric acid, sulfuric acid)
   Platinum (Bt)	Dareereyaal aad u daxal badan oo heerkul sare leh
   Titanium (Ti)	Biyaha badda, dareereyaal ay ku jiraan koloriin
   Qalabka Dahaarka
   Cinjir	Biyaha guud, wasakhda, iyo wasakhda
   PTFE (Teflon)	Asiidhyo xooggan, alkaliyaal xooggan
   Neoprene	Dareerayaal leh walxo, walxo macdan ah

4. Xaaladaha Rakibaadda
   • Dhererka Tuubada Toosan: Dhererka lagu taliyay ka hor mitirka socodka waa ≥5 jeer dhexroorka tuubada iyo ≥2 jeer ka dib mitirka si looga fogaado xaaladaha socodka oo xumaada.
   • Socodka Tuubada oo Buuxa: Mitirka socodka waa in lagu rakibaa qayb tuubo oo si buuxda u buuxsan si looga hortago in xumbo hawo iyo tuubooyin madhan ay saameeyaan saxnaanta cabbirka.
   • Arrimaha Deegaanka: Ka fogow faragelinta korantada ee xooggan ee ka timaadda ilo sida darawallada soo noqnoqda ee isbeddela ama matoorada; saldhig habboon ayaa lagama maarmaan ah.
5. Hab-raaca Calaamadaha Soo-saarka iyo Isgaarsiinta
   • Calaamadaha Analog-ka: 4-20mA (calaamad warshadeed oo caadi ah)
   • Isgaarsiinta Dijital ah: RS485 (Modbus), HART, Profibus
   • Soo saarista garaaca wadnaha: Ku habboon codsiyada cabbiraadda
6. Koronto Bixinta
   • AC 220V/110V (qalabyada go'an)
   • DC 24V (nidaamyada otomaatiga warshadaha)
   • Baytari ku shaqeeya (meelaha fog fog ee aan lahayn koronto dibadeed)
7. Shuruudaha Kale ee Gaarka ah
   • Cabbirka Laba-geesoodka ah: Haddii loo baahdo cabbiraadda socodka rogaal-celinta, dooro qaab taageera cabbiraadda laba-jiho.
   • Qiimaynta Ilaalinta: IP65 (deegaannada guud), IP67/IP68 (deegaannada dibadda ama kuwa biyaha hoostooda ku jira).
   • Shuruudaha u adkeysiga qaraxa: Si loogu isticmaalo meelaha kiimikada batroolka ama kuwa khatarta ah, waa in la doortaa mitirka socodka ee aan qarxi karin.

Tixgelinta arrimahan waxay kaa caawin doontaa inaad doorato mitirka socodka elektaroonigga ah ee saxda ah ee codsigaaga.